点击图片查看原图
Grilamid PA12 LV-3H
| 厂家(产地)： | 瑞士EMS | 牌号： | LV-3H | 断裂伸长率： | 8 |
| 规格级别： | 玻纤增强级 | 密度： | 1.22 | 缺口冲击强度： | 20 |
| 吸水率： | 1.1 | 用途： | 汽车工业、电机、电子、包装、休闲、运动与机械工程等领域 | 阻燃等级： | 0 |
| 用途级别： | 玻璃纤维增强 | ||||
| 查看全部参数> | |||||
2. 30% glass fibre reinforced medium viscosity PA12 grade. Heat
stabilised.
3. Injection moulding product with high stiffness, dimensional
stability under varying climate conditions, high impact strength,
problem free processing. WRAS approved for drinking water
applications with hot water.
4. Example applications: Clock cases, levers, bearing shells,
switches, slide gauges, covers.
5. Datasheets and other information :
LinktopRheological propertiesValueUnitTest StandardMelt volume-flow rate40cm³/10minISO 1133Temperature275°CISO 1133Load5kgISO 1133Molding shrinkage (parallel)0.1%ISO 294-4, 2577Molding shrinkage (normal)0.7%ISO 294-4, 2577topMechanical propertiesValueUnitTest StandardTensile Modulus6000MPaISO 527-1/-2Stress at break105MPaISO 527-1/-2Strain at break8%ISO 527-1/-2Tensile creep modulus (1h)5000MPaISO 899-1Tensile creep modulus (1000h)3500MPaISO 899-1Charpy impact strength (+23°C)80kJ/m²ISO 179/1eUCharpy impact strength (-30°C)80kJ/m²ISO 179/1eUCharpy notched impact strength (+23°C)20kJ/m²ISO 179/1eACharpy notched impact strength (-30°C)15kJ/m²ISO 179/1eAPuncture - maximum force (+23°C)1300NISO 6603-2Puncture energy (+23°C)7JISO 6603-2topThermal propertiesValueUnitTest StandardMelting temperature (10°C/min)178°CISO 11357-1/-3Temp. of deflection under load (1.80 MPa)160°CISO 75-1/-2Temp. of deflection under load (8.0 MPa)90°CISO 75-1/-2Vicat softening temperature (50°C/h 50N)170°CISO 306Coeff. of linear therm. expansion (parallel)20E-6/KISO 11359-1/-2Coeff. of linear therm. expansion (normal)150E-6/KISO 11359-1/-2Burning Behav. at 1.5 mm nom. thickn.HBclassIEC 60695-11-10Thickness tested1.6mmIEC 60695-11-10UL recognitionUL--Burning Behav. at thickness hHBclassIEC 60695-11-10Thickness tested0.8mmIEC 60695-11-10UL recognitionUL--Oxygen index20.5%ISO 4589-1/-2topElectrical propertiesValueUnitTest StandardRelative permittivity (100Hz)3-IEC 60250Relative permittivity (1MHz)3-IEC 60250Dissipation factor (100Hz)750E-4IEC 60250Dissipation factor (1MHz)300E-4IEC 60250Volume resistivity1E11Ohm*mIEC 60093Surface resistivity1E12OhmIEC 60093Electric strength35kV/mmIEC 60243-1Comparative tracking index550-IEC 60112topOther propertiesValueUnitTest StandardWater absorption1.1%Sim. to ISO 62Humidity absorption0.6%Sim. to ISO 62Density1220kg/m³ISO 1183topMaterial specific propertiesValueUnitTest StandardViscosity number170cm³/gISO 307, 1157, 1628topRheological calculation propertiesValueUnitTest StandardDensity of melt1050kg/m³-Thermal conductivity of melt0.26W/(m K)-Spec. heat capacity melt2200J/(kg K)-Eff. thermal diffusivity1.13E-7m²/s-Ejection temperature155°C-topTest specimen productionValueUnitTest StandardInjection Molding, melt temperature260°CISO 294mold temperature80°CISO 10724injection velocity300mm/sISO 294pressure at hold75MPaISO 294topDiagramtopCharacteristicProcessingInjection MoldingDelivery formPelletsAdditivesRelease agentSpecial CharacteristicsLight stabilized or stable to light, Heat stabilized or stable to heatRegional AvailabilityNorth America,Europe,Asia Pacific,South and Central America,Near East/AfricatopProcessing TexteInjection moldingPREPROCESSING
Max. water content : <= 0.1 %
PROCESSING
Melt temperature : 260 °C
Mould wall temperature : 80 °C
Holding pressure : 300-800 bar
Screw : 50-100 rpm
Back pressure : 1-15 bar
Injection speed : 4
(1=slow, 3=medium, 5=fast)
Please consider the information about the application of the materials.topChemical Media ResistanceAcidsAcetic Acid (5% by mass) at 23 °CCitric Acid solution (10% by mass) at 23 °CLactic Acid (10% by mass) at 23 °CHydrochloric Acid (36% by mass) at 23 °CNitric Acid (40% by mass) at 23 °CSulfuric Acid (38% by mass) at 23 °CSulfuric Acid (5% by mass) at 23 °CChromic Acid solution (40% by mass) at 23 °CBasesSodium Hydroxide solution (35% by mass) at 23 °CSodium Hydroxide solution (1% by mass) at 23 °CAmmonium Hydroxide solution (10% by mass) at 23 °CAlcoholsIsopropyl alcohol at 23 °CMethanol at 23 °CEthanol at 23 °CHydrocarbonsn-Hexane at 23 °CToluene at 23 °Ciso-Octane at 23 °CKetonesAcetone at 23 °CEthersDiethyl ether at 23 °CMineral oilsSAE 10W40 multigrade motor oil at 23 °CSAE 10W40 multigrade motor oil at 130 °CSAE 80/90 hypoid-gear oil at 130 °CInsulating Oil at 23 °CStandard FuelsISO 1817 Liquid 1 at 60 °CISO 1817 Liquid 2 at 60 °CISO 1817 Liquid 3 at 60 °CISO 1817 Liquid 4 at 60 °CStandard fuel without alcohol (pref. ISO 1817 Liquid C) at 23 °CStandard fuel with alcohol (pref. ISO 1817 Liquid 4) at 23 °CDiesel fuel (pref. ISO 1817 Liquid F) at 23 °CDiesel fuel (pref. ISO 1817 Liquid F) at 90 °CDiesel fuel (pref. ISO 1817 Liquid F) above 90 °CSalt solutionsSodium Chloride solution (10% by mass) at 23 °CSodium Hypochlorite solution (10% by mass) at 23 °CSodium Carbonate solution (20% by mass) at 23 °CSodium Carbonate solution (2% by mass) at 23 °CZinc Chloride solution (50% by mass) at 23 °COtherEthyl Acetate at 23 °CHydrogen peroxide at 23 °CDOT No. 4 Brake fluid at 130 °CEthylene Glycol (50% by mass) in water at 108 °C1% nonylphenoxy-polyethyleneoxy ethanol in water at 23 °C50% Oleic acid + 50% Olive Oil at 23 °CWater at 23 °CDeionized water at 90 °CPhenol solution (5% by mass) at 23 °CtopDisclaimerEMS-CHEMIE AG
Business Unit EMS-GRIVORY
Homepage :EMS-GRIVORYeMail :welcome@emsgrivory.comIn the line with the aims of CAMPUS, the values are intended to serve as
an aid in preselecting materials and for an overview of the EMS-GRIVORY
product range. They correspond to our current knowledge, a legal
guarantee concerning the application and the manufacture can however not
be assumed. This data does not cancel the processor's own testing and
inspection obligations.topThe CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991
宁波市江东开迪贸易有限公司提供Grilamid PA12 LV-3H，欢迎咨询商谈。
