TPV 111-45

TPV 111-45

厂家(产地)：	EXXONMOBIL	牌号：	111-45
查看全部参数>

Advanced Elastomer Systems Santoprene® 111-45 Thermoplastic RubberCategories:Polymer; Thermoplastic; Elastomer, TPE; Thermoplastic Elastomer, Melt-Processible RubberMaterial Notes:A black thermoplastic molding grade elastomer with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and chlorosulfonated polyethylene. A high-flow material designed for use in difficult injection molding applications.Key Features: Dielectric constant 2.3, dielectric strength at 3.17 mm (125 mil), 19.6 kV/mm (500 v/mil); Excellent flex fatigue resistance; Excellent ozone resistance; Flex modulus at Tangent 5.5 MPa (800 psi); Excellent sealing propertiesAdditional processing comments: This thermoplastic rubber is a shear-dependent material that can be processed on conventional thermoplastic equipment for injection molding, extrusion, or blow molding. For extrusion, a general purpose screw with a compression ratio of 2.5 to 3.0 is recommended. Material can be recycled. SANTOPRENE rubber is incompatible with acetal and PVC.Values below are for injection molded plaques, side gated, 82.6 mm x 117.5 mm x 3.0 mm. Tensile properties measured across flow. Data provided by Advanced Elastomer Systems.Vendors:No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.Physical PropertiesMetricEnglishCommentsDensity0.960 g/cc0.0347 lb/in³TPE-0105 (ASTM D792)Mechanical PropertiesMetricEnglishCommentsHardness, Shore A45455 Second; TPE-0169 (ASTM D 2240)Tensile Strength, Ultimate3.60 MPa522 psiTPE-0153 (ASTM D 412)Elongation at Break320%320%TPE-0153 (ASTM D 412)** Modulus0.00150 GPa0.218 ksiTPE-0153 (ASTM D 412)Flexural Modulus0.00550 GPa0.798 ksiTangentGraves Tear Strength14.5 kN/m82.7 pliTPE-0056 (ASTM D 624)Compression Set25.00%25.00%22 hrs.; TPE-0016 (ASTM D 412)@Temperature 70.0 °C@Temperature 158 °FTensile Set5.00%5.00%TPE-0053 (ASTM D 412)Electrical PropertiesMetricEnglishCommentsDielectric Constant2.32.3Frequency not specifiedDielectric Strength19.6 kV/mm498 kV/in@Thickness 3.17 mm@Thickness 0.125 inThermal PropertiesMetricEnglishCommentsBrittleness Temperature<= -60.0 °C<= -76.0 °FTPE-0089 (ASTM D 746)Processing PropertiesMetricEnglishCommentsProcessing Temperature177 - 232 °C351 - 450 °FDrying Temperature82.0 °C180 °FDesiccant drying for 3 hours recommendedDry Time3 hour3 hour

宁波市江东开迪贸易有限公司提供TPV 111-45，诚信如金，欢迎合作。